??足球正网开户??

Location: ??足球正网开户??- > Products / Arc tooth rubber timing belt


Arc tooth timing belt

Tooth profile parameter table for each model of arc tooth synchronous belt


Tooth profile Tooth shape code model Pitch (mm) Tooth height (mm) Belt thickness (mm) Remark

HTD arc tooth timing belt
HTD

HTD 2M 2 0.75 1.36 Details
3M 3 1.17 2.4 Details
5M 5 2.06 3.8 Details
8M 8 3.36 6 Details
14M 14 6.02 10 Details
20M 20 8.4 13.2 Details

STPD / STS timing belt
STPD / STS
STPD / STS S2M 2 0.76 1.36 Details
S3M 3 1.14 2.2 Details
S4.5M 4.5 1.71 2.81 Details
S5M 5 1.91 3.4 Details
S8M 8 3.05 5.3 Details
S14M 14 5.3 10.2 Details

RPD / HPPD toothed timing belt
PD / HPPD

RPP / HPPD 2M 2 0.76 1.36 Details
3M 3 1.15 1.9 Details
5M 5 1.95 3.5 Details
8M 8 3.2 5.5 Details
14M 14 6 10 Details

齿同步带系列 同步带、同步带轮选型图 同步带节线长计算软件 同步带轮技术 Popular clicks: Trapezoidal tooth timing belt series timing belt, timing belt selection chart timing belt length calculation software timing belt technology

Industrial arc tooth timing belt uses raw materials:
Imported high-quality synthetic neoprene is used as the main raw material, mixed with a variety of auxiliary materials; the skeleton material is imported high-quality glass fiber rope; the toothed surface is protected by nylon 66 high elastic cloth. It has the characteristics of good dynamic bending resistance, good anti-cracking performance, excellent ozone performance, aging resistance, heat resistance, oil resistance, wear resistance, etc.

Attentions when using industrial arc tooth synchronous belt:
When purchasing, pay attention to the clean surface of the product, no distortion of the belt, and full teeth.
It is strictly forbidden to bend the arc toothed belt products to avoid damaging the skeleton material and affecting the belt strength.
It is strictly forbidden to scratch the belt for timing belt products, so as not to damage the belt early. Timing belt products avoid contact with chemicals (especially strong oxidizing acids such as concentrated sulfuric acid).
Synchronous belt products should avoid long-term contact with oil and water.
When replacing the timing belt, the tension of the belt must be minimized before taking it out. It is strictly forbidden to use a non-professional tool to pry it down under high tension


More detailed products belonging to this category: -----------------------------------
Copyright ? Ningbo Yinzhou Gaiqi Synchronous Belt Wheel Co., Ltd. 2007-2019 All Rights Reserved.
Phone: 4006-574-123 / 0574-27834692 Fax: 0574-27834691
Address: No. 29, Lane 39, Zhongxing Road, Yinzhou District, Ningbo E-Mail: sales@belt-pulley.com
Zhejiang ICP No. 09102982 Gage Company Network Department provides technical support
七乐彩 欢乐拼三张 天天电玩城 欢乐拼三张