??足球正网开户??

Location: ??足球正网开户??- > Products / Double-sided tooth timing belt

Double-sided toothed rubber timing belt (timing belt design and selection)
1. The pitch and tooth profile of the double-sided toothed timing belt is equivalent to the tooth profile and pitch of the single-sided toothed timing belt.
2. The double-sided toothed synchronous belt can be divided into two standard types according to the arrangement of the toothed belt;
DA double-sided tooth synchronous belt, the teeth on both sides of which are symmetrically arranged, see figure (A)

Double-sided tooth timing belt
DB type double-sided tooth synchronous belt, the teeth on both sides are arranged in staggered positions, see figure (B)
Double-sided tooth timing belt
Models, specifications and dimensions of double-sided toothed synchronous belts
model
W
T
Specification code
Pitch length
Number of teeth
D-MXL
0.508
1.53
D-XL
0.508
3.05
196XL-1970XL
497.84-5003.8
98-985
DL
0.762
4.58
203L-1988L
514.35-5048.25
54-530
DH
1.372
5.95
670H-2500H
1701.8-6350
124-500
D-XH
2.794
15.49
700XH-2275XH
1778.00-5778.5
80-260
D-XXH
3.048
22.11
700XXH-2625XXH
1778.00-6667.5
56-210
D-T2.5
0.6
2
T2.5x500-T2.5x5000
500.00-5000.00
200-2000
D-T5
1
3.4
T5x500-T5x7000
500.00-7000.00
100-1400
D-T10
2
7
T10x500-T10x7050
500.00-7050.00
50-705
D-T20
3
13
T20x1700-T20x7000
1700.00-7000.00
85-350
D-AT10
2
7
AT10x500-AT10x7000
500.00-7000.00
50-700
HTD.DA-3M
0.76
3.1
501-3M-5010-3M
501.00-5010.00
167-1670
HTD.DA-5M
1.143
5.26
500-5M-7000-5M
500.00-7000.00
50-1400
HTD.DA-8M
1.372
8.17
512-8M-6880-8M
512-6880
64-860
HTD.DA-14M
2.8
14.84
1750-14M-6860-14M
1750-6860
125-490
HTD.DA-S8M
1.372
7.48
S8M-512-S8M-6880
512-6880
64-860

Industrial double-sided tooth timing belt uses raw materials:
Imported high-quality synthetic neoprene is used as the main raw material, mixed with a variety of auxiliary materials; the skeleton material is imported high-quality glass fiber rope; the toothed surface is protected by nylon 66 high elastic cloth. It has the characteristics of good dynamic bending resistance, good anti-cracking performance, excellent ozone performance, aging resistance, heat resistance, oil resistance, wear resistance, etc.

Attention when using industrial double-sided tooth synchronous belt:
When purchasing, pay attention to the clean surface of the product, no distortion of the belt, and full teeth.
Timing belt products must not be twisted, so as not to damage the skeleton material and affect the belt strength.
It is strictly forbidden to scratch the belt for timing belt products, so as not to damage the belt early. Timing belt products avoid contact with chemicals (especially strong oxidizing acids such as concentrated sulfuric acid).
Synchronous belt products should avoid long-term contact with oil and water.
When replacing the timing belt, the tension of the belt must be minimized before taking it out. It is strictly forbidden to use a non-professional tool to pry the timing belt under high tension.


More detailed products belonging to this category: -----------------------------------
Copyright ? Ningbo Yinzhou Gaiqi Synchronous Belt Wheel Co., Ltd. 2007-2019 All Rights Reserved.
Phone: 4006-574-123 / 0574-27834692 Fax: 0574-27834691
Address: No. 29, Lane 39, Zhongxing Road, Yinzhou District, Ningbo E-Mail: sales@belt-pulley.com
Zhejiang ICP No. 09102982 Gage Company Network Department provides technical support
七乐彩 欢乐拼三张 天天电玩城 欢乐拼三张