Gage timing belt company's cutting V-belt series products include: agricultural machinery variable speed (half-width) V-belt, cutting industrial variable-speed wide V-belt (stepless variable-speed belt), cutting narrow V-belt, cutting common V-belts, V-belts for cutting cars, V-belts with large wedge angles, V-belts for cutting motorcycles, and various types of V-belt products are widely used in light industry, mining, petroleum, chemical, metallurgical, textile, automotive and other machinery On the equipment drive.
Cutting V-belt series products include: cutting industrial variable-speed wide V-belt (stepless speed-changing belt), cutting common V-belt, cutting narrow V-belt, cutting automobile V-belt, cutting motorcycle V-belt, agricultural machinery Variable speed (half-width) V-belts, V-belts with large wedge angles, and various types of V-belt products.
V-belts can be divided into ordinary V-belts (Y, Z, A ～ E), narrow V-belts (SPZ ～ SPC), and narrow V-belts with effective width (9N / 9J, 15N / 15J, 25N / 25J) and other types. Wedges The angle θ = 40 °. The Z type is the O type of the original national standard. When designing the pulley diameter, the most favorable belt speed should be considered: v = 20m / s, Vmin = 5m / s, ordinary V-belt Vmax = 30m / s, and narrow V-belt Vmax = 40m / s. If the pulley diameter d1 is too small, the belt speed will be low, the belt's working load will increase, and the bending will increase, which will affect the belt's life. On the contrary, if the belt speed is too large, the belt's centrifugal force will increase (proportional to v2), which will also reduce the belt life.
The bottom surface of the cutting V-belt series products of Gage Synchronous Pulley Co., Ltd. is designed with a reasonable tooth profile, so that the transmission can use a pulley with a smaller outer diameter, thereby further improving the heat resistance and flex resistance of the V-belt. It also has the characteristics of accurate length and small elongation, and its service life is significantly improved than ordinary V-belts. It is the best product in the field of mechanical transmission. In order to ensure the excellent quality of the company's cutting V-belt series products, its main raw materials (such as skeleton materials, rubber, etc.) are purchased and imported from designated foreign countries, and the technical requirements of the products are produced in accordance with international, national and foreign advanced standards. Product quality is close to the level of similar foreign products.